Zodiac G3/G3 Pro Flow Gauge (R0527500)

The G3/G3 Pro flow gauge is a replacement part made by Zodiac. The same high-grade plastic material was used for the original factory part. This meansit isdurableand performs with the same capabilities as well.

This flow gauge was designed to help you program or adjust the flow of water that comes from your pool pump to the suction side cleaner allowing it to perform at its maximum capabilities. Sucking and pulling dirt debris and other forms of mulch off the surface of the pool as it operates.

This part is Blue in color with a spring that runs up the middle and has a Yellow tag on the end. When adjusting the flow of water, you want the Red tag on the bottom to be sitting at 3. This means it is set at the desired flow required for the cleaner to operate correctly. If the gauge is at a 5 then the flow is too high, if it is sitting at a 1 then the flow is too low. You may have to make a few adjustments to your pump in order to correct this issue.

Please check out the video for this cleaner HERE!

Also, check out this video HERE!

0 Links